MICA BAND HEATERS
 Mica
Band Heaters are specially designed for heating
up cylindrical surface and are capable of operating
at an elevated temperature and provides longer
life. They are shaped in various configurations
to suit varying requirements. They are manufactured
out of best quality mica and it also contains
imported variety of mica.
They require special arrangement for installation
and insulation arrangements for heat losses. There
are cut outs for thermocouples and holes provided
to suit specific requirements.
Sizes
: Heaters are available for cylinders
in the range of 1” to 24” OD and
above.
Width : 1”
to 12” width and above.
Voltage :220
v, 240 v single phase AC supply or 380 v,
2 phase AC supply or 3 phase 4 terminal system.
Wattage : Minimum
50 w to 6000 w and beyond.
Watt Densities
:The Mica Band Heaters are constructed with
lower watt density capability. They are available
in the range of 20w to 40w per square inch.
Application
: They are used in plastic extruders,
injection moulding machines etc. |
FLEXIBLE CERAMIC BAND HEATERS
 Flexible
Ceramic Band Heaters are used in applications
that require temperature up to 4500° C and
a wattage density of 50w per square inch. They
are manufactured using individual ceramic links
which allows the heater to be opened without disturbing
or removing other heaters in use. It consists
of stainless steel clamp band with swivel toggles
for adequate clamping and has electrical termination.
The Flexible Band Heater has a diameter of 2”
and with of 11/2” and above. The sheath
is made up of stainless steel or treated steel
sheet.
when ordering please specify
1. Inside diameter and width
2. Wattage and Voltage
3. Basic construction
4. Gap, leads, length etc.
|
